Description: Platen I/L Open • The DADF was opened when there is a document inserted in the DADF. • A document is inserted into the DADF when the DADF is open.
Remedy: 1. Check whether the DADF is mechanically closed properly. 2. Check the actuator of the Platen Angle Sensor for operation failure and damage. (PL 1.9) 3. Check the following sensors: • Platen Open Sensor (Input Check [062-300]) • Platen Angle Sensor (Input Check [062-301]) • DADF Document Set Sensor (Input Check [005-102]) 4. If no problem is found, replace the following parts in sequence: • Platen Open Sensor (PL 1.9) • Platen Angle Sensor (PL 1.9) • DADF Document Set Sensor (PL 56.6) • ESS/MCU PWB (PL 18.3)