Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 074-101 — Xerox WorkCentre 5024

Code: 074-101

Description: Feed Out Sensor 4 On Jam (Tray 4) The Feed Out Sensor 4 did not turn ON within the specified time after the Paper had been fed from Tray 4.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path. • Usage of out of spec paper. • The Drive Gear for wear and damage. • The Tray 4 Feed Roll, Retard Roll, and Nudger Roll for contamination, wear, and transportation failure due to deterioration. • The Tray 4 Takeaway Roll and Pinch Roll for contamination, wear, and transportation failure due to deterioration. • Feed Out Sensor 4: Input Check [072-112] (PL 11.5) • Tray 4 Feed/Lift Up Motor: Output Check [072-011] (Feed) (PL 11.3) • 2TM Takeaway Motor: Output Check [072-008] (PL 11.6) • 2TM Takeaway Roll Clutch: Output Check [072-006] (PL 11.6) If no problems are found, replace the following parts in sequence: • 2TM PWB (PL 11.6) • ESS/MCU PWB (PL 18.3)

← Xem tất cả mã lỗi Xerox WorkCentre 5024

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie