Description: Regi. Sensor On Jam (Tray 4) The Regi Sensor did not turn ON within the specified time after the Feed Out Sensor 2 is On during paper feed from Tray 4.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path. • Usage of out of spec paper. • The Drive Gear for wear and damage. • The Tray 2 Takeaway Roll and Pinch Roll for contamination, wear, and transportation failure due to deterioration. • Regi Sensor: Input Check [071-105] (PL 15.1) • Feed Out Sensor 2: Input Check [072-106] (PL 10.5) • STM Takeaway Motor: Output Check [072-007] (PL 10.6) • STM Takeaway Roll Clutch: Output Check [072-005] (PL 10.6) If no problems are found, replace the following parts in sequence: • STM PWB (PL 10.6) • ESS/MCU PWB (PL 18.3)