Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-103 — Xerox WorkCentre 5024

Code: 077-103

Description: Fusing Unit Exit Sensor Off Jam (Long) After the Regi Sensor Off, the Fusing Unit Exit Sensor did not turn OFF within the specified time.
Remedy: Check the following: • The Fusing Unit Exit Sensor (Input Check [071-106]) for operation failure. (PL 7.1) • The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1) • The Invert Motor (Output Check [071-003] (Exit)) for operation failure. (When Duplex is installed) (PL 17.1) • The Exit Roll and Pinch Roll for transportation failure due to contamination, wear, and deterioration. • The Transfer Unit for a decrease in the transportation force. • The Heat Roll for wound up, stuck paper. • The Drive Gear for wear and damage. • Usage of out of spec paper. If no problems are found, replace the ESS/MCU PWB (PL 18.3).

← Xem tất cả mã lỗi Xerox WorkCentre 5024

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie