Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-104 — Xerox WorkCentre 5024

Code: 077-104

Description: Fusing Unit Exit Sensor Off Jam (Short) The time taken for the Fusing Unit Exit Sensor to turn from ON to OFF is shorter than the specified time.
Remedy: Check the following: • The Fusing Unit Exit Sensor (Input Check [071-106]) for operation failure. (PL 7.1) • The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1) • The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1) • The Invert Motor (Output Check [071-003] (Exit)) for operation failure. (When Duplex is installed) (PL 17.1) • The Heat Roll for wound up, stuck paper. • Usage of out of spec paper. If no problems are found, replace the ESS/MCU PWB (PL 18.3).

← Xem tất cả mã lỗi Xerox WorkCentre 5024

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie