Description: Drum New CRU Installation Fail During the developing powder installation mode after installing the Drum Cartridge, the ATC Measured Value is found to be abnormal. (Seal not removed)
Remedy: 1. Remove the developing powder seal from the Drum Cartridge. 2. If the problem persists after removing the seal, replace the ATC Sensor. (PL 8.6) 3. If the problem persists, replace the Drum Cartridge. (PL 8.1) NOTE: After replacing the Drum Cartridge, clear the HFSI [950-807] (Drum Cycle Counter) to '0'.