Description: Controller NVM Data Defect Any of the following was detected: • The On Board NVM data of the Controller is corrupted. • The On Board NVM of the Controller is not installed. • Any one of the Print Counter has reached its maximum value. • The number of times the NVM can be changed has reached its limit. NOTE: If this Fault reoccurs after performing Data Backup/Restore, perform Data Restore again. (Perform NVM Matching (NVM [621-400]) in the CE Mode.)
Remedy: 1. Turn the power OFF and ON. 2. Perform NVM Initialize in the CE Mode. (Refer to 6.5.2.4 NVM Initialize)