Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 005-284 — Xerox WorkCentre 5230

Code: 005-284

Description: DADF Auto Paper Selection Sensor Logic Failure RAP The combinations of outputs from the DADF APS 1 Sensor, DADF APS 2 Sensor and DADF APS 3 Sensor are abnormal.
Remedy: Execute Component Control[005-218]. Actuate the DADF APS 1 Sensor with paper. The display changes. Y↓N→Check the connections of P/J777 and P/J761. P/J777 and P/J761 are connected correctly. Y↓N→Connect P/J777 and P/J761. Check the wire between J777 and J761 for an open circuit or a short circuit. The wire between J777 and J761 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P761-4 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P761-6 (+) and GND (-). Actuate the DADF APS 1 Sensor with paper. The voltage changes. Y↓N→Replace the DADF APS 1 Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Execute Component Control[005-219]. Actuate the DADF APS 2 Sensor with paper. The display changes. Y↓N→Check the connections of P/J778 and P/J761. P/J778 and P/J761 are connected correctly. Y↓N→Connect P/J778 and P/J761. Check the wire between J778 and J761 for an open circuit or a short circuit. The wire between J778 and J761 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P761-1 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P761-3 (+) and GND (-). Actuate the DADF APS 2 Sensor with paper. The voltage changes. Y↓N→Replace the DADF APS 2 Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Execute Component Control[005-220]. Actuate the DADF APS 3 Sensor with paper. The display changes. Y↓N→Check the connections of P/J779 and P/J785. P/J779 and P/J785 are connected correctly. Y↓N→Connect P/J779 and P/J785. Check the wire between J779 and J785 for an open circuit or a short circuit. The wire between J779 and J785 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P785-1 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P785-3 (+) and GND (-). Actuate the DADF APS 3 Sensor with paper. The voltage changes. Y↓N→Replace the DADF APS 3 Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Replace the DADF PWB (PL 15.3).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie