Code: 005-305
Description: CVT Feeder Cover Interlock Open (running) RAP The system detected that the DADF Interlock was opened while the DADF was running (RUN/ SUSPEND).
Remedy: Check opening/closing of the Feeder Cover. The Feeder Cover can be opened/closed. Y↓N→Reinstall the Feeder Cover correctly. Check installation of the DADF Interlock Switch. The DADF Interlock Switch is installed correctly. Y↓N→Install the DADF Interlock Switch correctly. Execute Component Control[005-212 DADF Interlock Switch]. Open and close the Feeder Cover. The display changes. Y↓N→Check the connections of P/J753, F1 and F2. P/J753, F1 and F2 are connected correctly. Y↓N→Connect P/J753, F1 and F2. Check the wire between J753 and F1, and between J753 and F2 for an open circuit or a short circuit. The wires between J753 and F1, and between J753 and F2 are conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Check the conductivity of the DADF Interlock Switch (PL 15.7) between J753-2 and J753- 1. The wire between J753-2 and J753-1 is connecting successfully when the DADF Interlock Switch contact is closed, and is insulated when the contact is opened. Y↓N→Replace the DADF Interlock Switch (PL 15.7). Replace the DADF PWB (PL 15.3). Replace the DADF PWB (PL 15.3).