Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-420 — Xerox WorkCentre 5230

Code: 010-420

Description: Fuser Near end of life RAP The Fuser is near end of life.
Remedy: Turn on the power. Visually check the rotation of the Fuser Fan. The Fuser Fan is rotating. Y↓N→Measure the voltage between the MCU PWB P/J408-2 (+) and GND (-). The voltage is approx. +24VDC. Y↓N→Replace the MCU PWB (PL 9.1). Check the wires between MCU PWB and the Fuser Fan for an open or a short circuit. The wires between MCU PWB and the Fuser Fan conducts with less than a few ohms. Y↓N→Repair the open circuit or short circuit. Replace the Fuser Fan (PL 4.2). Measure the voltage between the MCU PWB P/J408-1 (+) and GND (-). The voltage is approx. 0VDC. Y↓N→Check the wire between the MCU PWB and the Fuser Fan for an open circuit or a short circuit. The wire conducts with less than a few ohms. Y↓N→Repair the open circuit or short circuit. Replace the Fuser Fan (PL 4.2). Replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie