Code: 012-243
Description: Booklet Folder Home Sensor ON Fail Folder Home Sensor is not turned on after the lapse of 500ms from Motor ON while Booklet Knife is returning to Home.
Remedy: Manually move the Booklet Tamper to both ends. Enter Component Control [013-022, Folder Knife Motor FWD] and [013-023, Folder Knife Motor REV] alternately. Select Start. The Booklet Folder Roll Motor energizes. Y↓N→Select Stop. Check continuity between the Booklet Folder Knife Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Folder Knife Motor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. Select [13-101, Folder Home Sensor]. Select Start. Block/unblock the Folder Home Sensor. The display changed. Y↓N→Select Stop. Check continuity between the Folder Home Sensor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Folder Home Sensor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. If the problem continues, replace the Finisher PWB (PL 23.16).