Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-265 — Xerox WorkCentre 5230

Code: 012-265

Description: Booklet Folder Home Sensor OFF Fail When the Booklet Home moves from Home position, the Folder Home Sensor did not turn OFF within the specified time.
Remedy: Manually move the Booklet Tamper to both ends. Enter Component Control [013-022, Folder Knife Motor FWD] and [013-023, Folder Knife Motor REV] alternately. Select Start. The Booklet Folder Roll Motor energizes. Y↓N→Select Stop. Check continuity between the Booklet Folder Knife Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Folder Knife Motor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. Select [13-101, Folder Home Sensor]. Select Start. Block/unblock the Folder Home Sensor. The display changed. Y↓N→Select Stop. Check continuity between the Folder Home Sensor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Folder Home Sensor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. If the problem continues, replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie