Description: Punch Waste Bin Missing RAP Punch Waste Bin Set Snr detected Punch Box to be missing.
Remedy: Enter Component Control [14-275], Puncher Box Set Sensor (PL 23.5). Select Start. Remove and insert the Puncher Waste Bin manually. The display changes Y↓N→Select Stop. Check continuity between the Puncher Box Set Sensor and Finisher Main PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Puncher Box Set Sensor (PL 23.5). If the problem continues, replace the Finisher PWB (PL 23.16). Check the Puncher Waste Box Actuator and Guide for deformation. The Puncher Waste Bin can be removed and inserted properly. Y↓N→Repair or replace the Puncher Waste Bin (PL 23.5). Select Stop. If the problem continues, replace the Finisher PWB (PL 23.16).