Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-910 — Xerox WorkCentre 5230

Code: 024-910

Description: Tray 1 size mismatch RAP After feeding from Tray 1, the lengths detected by the Registration Sensor and the Tray 1 Size Switch did not match.
Remedy: Check for foreign substances, distortion and paper powder in the paper transport path. No distortion, foreign substances, or paper powder are found in the paper transport path. Y↓N→Clear away the foreign substances and paper powder. Correct the distortion. Feed paper from another tray. The problem occurs when paper is fed from another tray. Y↓N→Check the guide. The guide is set correctly. Y↓N→Set the guide correctly. Check the operation of the Guide Actuator. The Guide Actuator works. Y↓N→Set the guide correctly. Check the installation of the Tray 1 Paper Size Switch. The Tray 1 Paper Size Switch is installed correctly. Y↓N→Install the Tray 1 Paper Size Switch (PL 2.1) correctly. Go to the Tray 1 Paper Size Switch and check the connectors. Execute Component Control [089-100 Registration Sensor]. Manually activate the actuator of the Registration Sensor (PL 2.4). The display changes. Y↓N→Check the connection of P/J104. PJ104 is connected correctly. Y↓N→Connect P/J104. Check the wire between J104 and J403 for an open circuit or a short circuit. The wire between J104 and J403 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the MCU PWB P403B-13 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the MCU PWB (PL 9.1). Measure the voltage between the MCU PWB P403B-8 (+) and GND (-). Actuate the Registration Sensor with paper. The voltage changes. Y↓N→Replace the Registration Sensor (PL 2.4). Replace the MCU PWB (PL 9.1). Replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie