Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-952 — Xerox WorkCentre 5230

Code: 024-952

Description: Tray 3 Empty RAP Tray 3 has run out of paper.
Remedy: Check the installation of the Tray 3 No Paper Sensor (PL 12.3/PL 13.6) and the operation of the actuator. The Tray 3 Level Sensor is installed correctly and the actuator works. Y↓N→Reinstall the Tray 3 Level Sensor. Execute Component Control[071-203 Tray 3 No Paper Sensor]. Manually activate the Tray 3 No Paper Sensor (PL 12.3/PL 13.6). The display changes. Y↓N→Check the connections of P/J102B, P/J661B and P/J549. P/J102B, P/J661B and P/ J549 are connected correctly. Y↓N→Connect P/J102B, P/J661B and P/J549. Check the wire between J102B and J549 for an open circuit or a short circuit. The wire between J102B and J549 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the Tray Module PWB P549-B10 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Tray Module PWB (PL 12.6/PL 13.8). Measure the voltage between the Tray Module PWB P549-B12 (+) and GND (-). Activate the actuator of the Tray 3 No Paper Sensor (PL 12.3/PL 13.6). The voltage changes. Y↓N→Replace the Tray 3 No Paper Sensor (PL 12.3/PL 13.6). Replace the Tray Module PWB (PL 12.6/PL 13.8). Replace the Tray Module PWB (PL 12.6/PL 13.8).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie