Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-954 — Xerox WorkCentre 5230

Code: 024-954

Description: MPT Empty RAP The MPT has run out of paper.
Remedy: Check the installation of the MPT No Paper Sensor (PL 7.1) and the operation of the actuator. The MPT No Paper Sensor is installed correctly and the actuator works. Y↓N→Reinstall the MPT No Paper Sensor. Execute Component Control[071-205 MPT No Paper Sensor]. Manually activate the MPT No Paper Sensor (PL 7.1). The display changes. Y↓N→Check the connections of P/J108, P/J605 and P/J411. P/J108, P/J605 and P/J411 are connected correctly. Y↓N→Connect P/J108, P/J605 and P/J411. Check the wire between J108 and J411 for an open circuit or a short circuit. The wire between J108 and J411 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the MCU PWB P411-6 (+) and GND (-). The voltage is approximately. +5VDC. Y↓N→Replace the MCU PWB (PL 9.1). Measure the voltage between the MCU PWB P411-8 (+) and GND (-). Activate the actuator of the MPT No Paper Sensor (PL 7.1). The voltage changes. Y↓N→Replace the MPT No Paper Sensor (PL 7.1). Replace the MCU PWB (PL 9.1). Replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie