Code: 024-958
Description: MPT Size Failure RAP The MPT is unable to detect the paper size.
Remedy: Check the installation and operation of the MPT Guide. The MPT Guide is installed correctly and the actuator works. Y↓N→Reinstall the MPT Guide. Measure the voltage between the MCU PWB P411-3 (+) and GND (-). Manually operate the MPT Guide. As the MPT Guide moves, the voltage changes accordingly. Y↓N→Check the connections of P/J107, P/J609, P/J605 and P/J411. P/J107, P/J609, P/ J605 and P/J411 are connected correctly. Y↓N→Connect P/J107, P/J609, P/J605 and P/J411. Check the wire between J107 and J411 for an open circuit or a short circuit. The wire between J107 and J411 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the MCU PWB P411-1 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the MCU PWB (PL 9.1). Replace the MPT Paper Size Sensor (PL 7.3). Replace the MCU PWB (PL 9.1).