Code: 024-965
Description: ATS/APS No Paper (IOT detect) RAP No paper is loaded in the tray.
Remedy: Check the actuator of the relevant No Paper Sensor (PL 2.3/PL 12.3/PL 13.6). The actuator is not distorted or damaged. Y↓N→Replace the actuator. Actuate the actuator of the relevant No Paper Sensor (PL 2.3/PL 12.3/PL 13.6). Tray 1: Component Control[071-201 Tray 1 No Paper Sensor] Tray 2: Component Control[071-202 Tray 2 No Paper Sensor] Tray 3: Component Control[071-203 Tray 3 No Paper Sensor] Tray 4: Component Control[071-204 Tray 4 No Paper Sensor] The display changes. Y↓N→Check the connections of the following connectors: Tray 1: P/J101, P/J601, P/J409 Tray 2: P/J103, P/J602, P/J409 Tray 3: P/J102B, P/J661B, P/J549 Tray 4: P/J102A, P/J661A, P/J549 The connectors are connected correctly. Y↓N→Connect the connectors. Check the following harnesses for an open circuit or a short circuit. Tray 1: Between J101 and J409 Tray 2: Between J103 and J409 Tray 3: Between J102B and J549/ BSD 7.12 Flag 4/Flag 5) The relevant harnesses are conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the following points (+) and GND (-). Tray 1: MCU PWB P409A-10 Tray 2: MCU PWB P409B-10 Tray 3: TM PWB P549-B10 Tray 4: TM PWB P549-A10 The voltage is approx. +5VDC. Y↓N→Replace the relevant PWB (MCU PWB (PL 9.1) or the Tray Module PWB (PL 12.6/ PL 13.8). Measure the voltage between the MCU PWB P409A-12 (+) and GND (-). Tray 1: MCU PWB P409A-12 Tray 2: MCU PWB P409B-12 Tray 3: TM PWB P549-B12 Tray 4: TM PWB P549-A12 Activate the actuator of the relevant No Paper Sensor (PL 2.3/PL 12.3/PL 13.6). The voltage changes. Y↓N→Replace the relevant No Paper Sensor (PL 2.3/PL 12.3/PL 13.6). Replace the relevant PWB (MCU PWB (PL 9.1) or Tray Module PWB (PL 12.6/PL 13.8). For Tray 1 or Tray 2, replace the MCU PWB (PL 9.1). For Tray 3 or Tray 4, replace the Tray Module PWB (PL 12.6/PL 13.8).