Description: Different width Mix Paper detect (Stapler job) RAP Paper Width Mix was detected during stapling.
Remedy: Check the connection of each MCU PWB connector. The connectors are connected correctly. Y↓N→Connect the connectors. Check the connection of each Finisher PWB connector. The connectors are connected correctly. Y↓N→Connect the connectors. Check the wire between P/J416 and J8843 for an open circuit or a short circuit. The wire between P/J416 and J8843 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the MCU PWB P/J416-A3 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the MCU PWB (PL 9.1). Replace the Finisher PWB (PL 22.7). If the problem persists, replace the MCU PWB (PL 9.1).