Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-976 — Xerox WorkCentre 5230

Code: 024-976

Description: (A-Finisher) Staple NG As Staple Head Home Sensor On was not detected within 450msec after the start of the operation of closing the Stapler Head, the reverse rotation started. After that, Staple Head Home Sensor On was detected.
Remedy: Check for remaining paper and foreign objects on the Compile Tray. The Compile Tray is free of paper and/or foreign objects. Y↓N→Remove the remaining paper and/or foreign object(s). Enter Component Control [012-046] and [012-047] alternately. The Staple Motor rotates. Y↓N→Check the connections of P/J8705 and P/J8735. P/J8705 and P/J8735 are securely connected. Y↓N→Connect P/J8705 and P/J8735 securely. Check for an open or short circuit between J8705 and J8735. The wires between J8705 and J8735 are OK. Y↓N→Repair the open or short circuit. Measure the voltages between J8705-3 to 6 (+) on the Finisher PWB and GND (-). Enter [012-046] and [012-047] alternately. Each voltage changes. Y↓N→Replace the Finisher PWB (PL 22.7). Replace the Staple Assembly (PL 22.4). Enter [012-046] and [012-047] alternately. The display changes. Y↓N→Check the connections of P/J8701 and P/J8731. P/J8701 and P/J8731 are securely connected. Y↓N→Connect P/J8701 and P/J8731 securely. Check for an open or short circuit between J8701 and J8731. The wires between J8701 and J8731 are OK. Y↓N→Repair the open or short circuit Measure the voltage between J8701-4 (+) on the Finisher PWB and GND (-). The voltage is approx. +5VDC. Y↓N→Go to Wirenet A-Finisher +5VDC and check the +5VDC circuit. Measure the voltage between J8701-5 (+) on the Finisher PWB and GND (-). Enter [012- 046] and [012-047] alternately. The voltage changes. Y↓N→Replace the Staple Assembly (PL 22.4). Check the wires and connectors for an intermittent open or short circuit. If the problem continues, replace the Finisher PWB (PL 22.7). Check the wires and connectors for an intermittent open or short circuit. If the problem continues, replace the Finisher PWB (PL 22.7).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie