Description: Drum K Motor Drive Failure RAP The Drum Motor is not rotating at the specified speed.
Remedy: Close the LH Cover and the Front Cover. Execute Component Control[071-037 Drum Motor ON]. The Drum Motor can be heard. Y↓N→Go to the OF 3 (MAIN DRIVE ASSY RAP). Check the installation of the Main Drive Assembly (PL 1.1). The Main Drive Assembly (PL 1.1) is installed correctly. Y↓N→Install the Main Drive Assembly (PL 1.1) correctly. Check the wire between J408-7 and J214-8 for an open circuit or a short circuit. The wire between J408-7 and J214-8 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Manually rotate the Main Motor rotor. It rotates smoothly. Y↓N→Check for foreign substances that are interfering with operation or installation failure. Foreign substances or installation failure are found. Y↓N→Replace the Main Drive Assembly (PL 1.1). Remove the foreign substances that are interfering with operation and correct the installation failure. Replace the Main Drive Assembly (PL 1.1). If the problem persists, replace the MCU PWB (PL 9.1).