Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 061-315 — Xerox WorkCentre 5230

Code: 061-315

Description: Start Of Scan RAP The light intensity of the LD2 does not reach the specified value
Remedy: Check the connections of P/J406 on the MCU PWB and P/J140 on the ROS Unit. Connections are connected correctly. Y↓N→Connect P/J406 and P/J140. Check the wires between J406 and J140 for an open circuit or a short circuit. The wires are conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Replace the ROS Unit (PL 3.1) If the problem persists, replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie