Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-114 — Xerox WorkCentre 5230

Code: 077-114

Description: Exit 2 Sensor Static JAM RAP Paper remains on the Exit 2 Sensor.
Remedy: Execute Component Control [071-110 Exit 2 Sensor]. Actuate the Exit 2 Sensor (PL 6.4) with paper. The display changes to H. Y↓N→Check the wire between P/J112 and P/J434 for an open circuit or a short circuit. The wire between J112 and J434 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Replace the Exit 2 Sensor (PL 6.4). If the problem persists, replace the Exit PWB (PL 9.1). Replace the Exit PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie