Description: Tray Module Left Hand Cover Interlock Open RAP • The 2TM Cover is open. • The TTM Cover is open.
Remedy: Check opening/closing of the Left Cover of the 2TM or TTM. The Left Cover of the 2TM or TTM can be opened/closed. Y↓N→Reinstall the Left Cover of the 2TM or TTM (PL 12.4/PL 13.7). Check the installation of the Tray Module Interlock Switch. The Tray Module interlock Switch is installed correctly. Y↓N→Install the Tray Module interlock Switch (PL 12.4/PL 13.7) correctly. Execute Component Control [071-301 Tray Module Left Cover Interlock Switch]. Open and close the Left Cover of the 2TM or TTM. The display changes. Y↓N→Check the connections of P/J554, FS812 and FS813. P/J554, FS812 and FS813 are connected correctly. Y↓N→Connect P/J554, FS812 and FS813. Check the wire between J554-2 and FS812, and between J554-1 and FS813 for an open circuit or a short circuit. The wires between J554-2 and FS812, and between J554-1 and FS813 are conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Check the conductivity of the Tray Module Left Cover Interlock Switch (PL 12.4/PL 13.7) between FS813 and FS812. The wire between FS813 and FS812 is connecting successfully when the 2TM Cover or TTM Cover is closed, and is insulated when the cover is open. Y↓N→Replace the Tray Module Left Cover Interlock Switch (PL 12.4/PL 13.7). Replace the Tray Module PWB (PL 12.6/PL 13.8). Replace the Tray Module PWB (PL 12.6/PL 13.8).