Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-307 — Xerox WorkCentre 5230

Code: 077-307

Description: DUP Cover Open RAP The DUP Cover is open.
Remedy: Check opening/closing of the DUP Cover. The DUP Cover can be opened/closed. Y↓N→Reinstall the DUP Cover. Check the installation of the Duplex Open Switch (PL 8.1). The Duplex Open Switch is installed correctly. Y↓N→Install the Duplex Open Switch (PL 8.1) correctly. Execute Component Control [071-305 Duplex Open Switch]. Open and close the DUP Cover. The display changes. Y↓N→Check the connections of P/J124 and P/J541. P/J124 and P/J541 are connected correctly. Y↓N→Connect P/J124 and P/J541. Check the wire between J124 and J541 for an open circuit or a short circuit. The wire between J124 and J541 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Check the conductivity of the Duplex Open Switch (PL 8.1) between J541-4 and J541-5. The wire between J541-4 and J541-5 is connecting successfully when the DUP Cover is closed, and is insulated when the cover is open. Y↓N→Replace the Duplex Open Switch (PL 8.1). Replace the MCU PWB (PL 9.1). Replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie