Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-308 — Xerox WorkCentre 5230

Code: 077-308

Description: Left Hand HIGH Interlock Open RAP The L/H-H Cover is open.
Remedy: Check opening/closing of the IOT L/H-H Cover. The IOT L/H-H Cover can be opened/ closed. Y↓N→Reinstall the IOT L/H-H Cover. Check the installation of the Exit 2 Interlock Switch. The Exit 2 Interlock Switch is installed correctly. Y↓N→Install the Exit 2 Interlock Switch correctly. Execute Component Control [071-304 Exit 2 Interlock Switch]. Open/close the IOT L/H-H Cover. The display changes. Y↓N→Check the connections of P/J434, P/J116, P606, J606 and SJ1. The P/J434, P/J116, P606, J606 and SJ1 are connected correctly. Y↓N→Connect P/J434, P/J116, P606, J606 and SJ1. Check the wire between J434 and J116 for an open circuit or a short circuit. The wire between J434 and J116 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Check the conductivity of the Exit 2 Interlock Switch (PL 6.4) between J434-12 and J434- 13. The wire between J434-12 and J434-13 is connecting successfully when the IOT L/H-H Cover is closed, and is insulated when the cover is open. Y↓N→Replace the Exit 2 Interlock Switch (PL 6.4). Replace the MCU PWB (PL 9.1). Replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie