Code: 003-318
Description: IIT Software RAP.
Remedy: • Ensure that the customer is programming a job within the parameters of the machine utilizing the UI. • Disconnect then reconnect the IIT, Control Panel, ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw • Reload Software (GP 16) • Replace IIT PWB (Switch the EEPROM) (PL 1.6) • If the problem persists, replace the ESS PWB (PL 35.2). (If not fixed by this, reinstall the original ESS PWB and RAM DIMM.)