Description: DADF Pre Registration Sensor Off Jam RAP After the DADF Feed Out Sensor turned OFF in 1 Sided mode, the DADF Pre Registration Sensor did not turn OFF within the specified time.
Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • DADF Feed Motor: Component Control [005-010] (PL 51.5) • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • DADF PWB failure. (PL 51.2)