Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 005-945 — Xerox WorkCentre 5325

Code: 005-945

Description: FS-Size Mismatch Jam On No Mix-Size or SS Mix- Size (Cont) RAP In No Mix or Slow Scan (SS) Mixed mode, it was detected that a document with a different size in Fast Scan (FS) direction was transported from the DADF. (If paper was not fed, 005-945 is displayed. If paper was fed, 005-947 is displayed.)
Remedy: Check the following: • Check the sw version of the controller sw - update if required • Check that the DADF Tray Set Guide operates normally. • DADF Tray Set Guide Sensors 1-3: Component Control [005-215/216/217] (PL 51.10) • Check the circuit between the DADF Tray Set Guide Sensors 1-3 and the DADF PWB • DADF APS Sensors 1-3: Component Control [005-218/219/220] (PL 51.17) • Check the circuit between the DADF APS Sensors 1-3 and the DADF PWB. • Change the system data 700-530 to "0" and disable the automatic startup boot operation at System Fail (make sure to reset to 1 when complete • If no problems are found, replace the DADF PWB (PL 51.2).

← Xem tất cả mã lỗi Xerox WorkCentre 5325

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie