Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-303 — Xerox WorkCentre 5325

Code: 012-303

Description: Finisher H-Transport Cover Open RAP (LX) The Finisher H-Transport Cover is open.
Remedy: Execute Component Control [012-303], H-Transport Open Sensor. Actuate the H-Transport Open Sensor (PL 23.4). The display changes. Y↓N→Check the wire between J8860 pin 2 and J8897 pin 2 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓N→Repair/reconnect as required. Measure the voltage between J8897, pins 3 and 1 on the Finisher PWB (BSD 12.14 - Office Finisher LX Horizontal Transportation. The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between J8897, pin 2 on the Finisher PWB and GND (BSD 12.14 - Office Finisher LX Horizontal Transportation). Actuate the H-Transport Open Sensor. The voltage changes. Y↓N→Replace the H-Transport Open Sensor (PL 23.4). Replace the Finisher PWB (PL 23.16). If the problem continues, replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5325

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie