Description: H-Transport Entrance Sensor Static Jam RAP (LX) Paper remains on the H-Transport Entrance Sensor.
Remedy: Execute Component Control [012-190], H-Transport Entrance Sensor. Actuate the H-Transport Entrance Sensor (PL 23.4). The display changes. Y↓N→Check the wire between J8861 pin 2 and J8897 pin 6 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓N→Repair/reconnect as required. Measure the voltage between J8897, pins 4 and 5 on the Finisher PWB (BSD 12.14 - Office Finisher LX Horizontal Transportation). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between J8897, pin 6 on the Finisher PWB and GND BSD 12.14 - Office Finisher LX Horizontal Transportation. Actuate the H-Transport Entrance Sensor. The voltage changes. Y↓N→Replace the H-Transport Entrance Sensor (PL 23.4). Replace the Finisher PWB (PL 23.16). If the problem continues, replace the Finisher PWB (PL 23.16).