Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-968 — Xerox WorkCentre 5325

Code: 024-968

Description: Stapler/Punch Concurrence RAP Staple position and Punch position are the same.
Remedy: Cancel Staple mode and Punch mode. The same problem recurs. Y↓N→Correct the settings. Check the connection of each connector of the Finisher PWB. The connectors are properly connected. Y↓N→Connect the connectors properly. Check the connection of the cable between the machine and the Finisher. The cable is properly connected. Y↓N→Connect the cable properly. Replace the Finisher PWB (PL 23.16). • Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw - update if required

← Xem tất cả mã lỗi Xerox WorkCentre 5325

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie