Code: 061-320
Description: ROS Motor Fail RAP ROS ready is not detected within the specified time (10s). NOTE: When turning the power OFF, turn OFF the power switch first and then the main power switch.
Remedy: Turn the power OFF and check the following connections for open circuit, short circuit, and poor connection. After the check is complete, turn the power OFF and ON. • ROS Motor for ROS Motor Ready Signal: Component Control [061-001] • Between the MCU PWB P/J406 and the LDD PWB P/J 620 If the problem persists, reload the machine software (GP 16). If the problem persists, replace the following parts in sequence: • ROS (PL 3.1) • MCU PWB (PL 18.2)