Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 073-900 — Xerox WorkCentre 5325

Code: 073-900

Description: Tray 3 Feed Out Sensor Static Jam RAP When the power was turned ON, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Tray 3 Feed Out Sensor detected paper.
Remedy: Check the following: • The Feed Out Sensor (PL 11.7) for remaining paper, contamination, Actuator return failure, or improper installation • The Feed Out Sensor for failure: Component Control [073-100] (PL 11.7) • The connection between the Feed Out Sensor P/J108-2 and the Tray Module PWB P/J 548-B3 for short circuit Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).

← Xem tất cả mã lỗi Xerox WorkCentre 5325

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie