Code: 074-900
Description: Tray 4 Feed Out Sensor Static Jam RAP When the power was turned ON, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Tray 4 Feed Out Sensor detected paper
Remedy: Check the following: • The Tray 4 Feed Out Sensor (PL 11.7) for remaining paper, contamination, Actuator return failure, or improper installation • The Tray 4 Feed Out Sensor for failure: Component Control [073-100] (PL 11.7) • The connection between the Tray 4 Feed Out Sensor P/J116-2 and the Tray Module PWB P/J548-A2 for short circuit Reload the machine software (GP 16). If no problems are found, replace the Tray Module PWB (PL 11.13).