Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-212 — Xerox WorkCentre 5325

Code: 077-212

Description: Tray Module Reset Fail RAP The Tray Module reset was detected.
Remedy: 1. Turn the power OFF and ON. 2. Go to the IOT wirenets. Check whether the voltage between the Tray Module PWB P/ J541-5 (+) and the GND (-) is +5VDC and whether the voltage between the Tray Module PWB P/J541-8 (+) and the GND (-) is +24VDC. 3. Turn the power OFF and go to the IOT wirenets and check the connection between the MCU PWB P423 and the Tray Module PWB P/J541 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • Reload the machine software (GP 16). • Tray Module PWB (PL 11.13) • MCU PWB (PL 18.2)

← Xem tất cả mã lỗi Xerox WorkCentre 5325

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie