Code: 078-900
Description: Tray 6 (HCF) Feed Out Sensor Static Jam RAP When the power was turned ON, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Tray 6 Feed Out Sensor detected paper
Remedy: Check the following: • The Tray 6 Feed Out Sensor (PL 10.7) for remaining paper, contamination, Actuator return failure, or improper installation • The Tray 6 Feed Out Sensor for failure: Component Control [078-101] (PL 10.7) • The connection between the Tray 6 Feed Out Sensor PF/JF67-2 and the HCF PWB PF/ JF01-2 for short circuit Reload the machine software (GP 16). If no problems are found, replace the HCF PWB (PL 10.8).