Description: FS-Size Mismatch Jam On No Mix-Size or SS Mix- Size (Cont) RAP In No Mix or Slow Scan (SS) Mixed mode, it was detected that a document with a different size in Fast Scan (FS) direction was transported from the DADF. (If paper was not fed, 005-945 is displayed. If paper was fed, 005-947 is displayed.)
Remedy: Check the following: • Check the sw version of the controller sw - update if required • Check that the DADF Tray Set Guide operates normally. • DADF Tray Set Guide Sensors 1-3: Component Control [005-215/216/217] (PL 51.10) • Check the circuit between the DADF Tray Set Guide Sensors 1-3 and the DADF PWB • DADF APS Sensors 1-3: Component Control [005-218/219/220] (PL 51.17) • Check the circuit between the DADF APS Sensors 1-3 and the DADF PWB. • Change the system data 700-530 to "0" and disable the automatic startup boot operation at System Fail (make sure to reset to 1 when complete • If no problems are found, replace the DADF PWB (PL 51.2).