Description: SS-Size Mismatch Jam On No Mix-Size (Cont) RAP In No Mix mode, it was detected that a document with a different size in Slow Scan (SS) direction was transported from the DADF. (If paper was not fed, 005-946 is displayed. If paper was fed, 005-948 is displayed.)
Remedy: Check the following: • Check the sw version of the controller sw - update if required • Document Tray Size Sensor 1/2: Component Control [005-221/222] (PL 51.10) • Check the circuit between the Document Tray Size Sensor 1/2 and the DADF PWB. • DADF Feed Out Sensor: Component Control [005-205] (PL 51.16) • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • DADF APS Sensors 1-3: Component Control [005-218/219/220] (PL 51.17) • Check the circuit between the DADF APS Sensors 1-3 and the DADF PWB. • If no problems are found, replace the DADF PWB (PL 51.2). • Change the system data 700-530 to "0" and disable the automatic startup boot operation at System Fail (make sure to reset to 1 when complete