Description: OHP Kind Mismatch (Not white frame OHP) RAP Operation Error. Paper Type Mismatch. The system is shut down (stop) if Transparencies with borders are detected regardless of the paper type setting in the Controller. Transparencies are loaded when a non-transparencies job is performed. Other paper is loaded when a Transparencies job is performed Transparencies with borders was detected. Jam occurs when borders were detected by checking transparencies for borders (by the OHP Sensor) after feeding started.
Remedy: • Check UI Settings and ensure that Tray 5 is selected with the correct media. • Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw - update if required (GP 16)