Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-952 — Xerox WorkCentre 5330

Code: 024-952

Description: Tray 3 No Paper RAP Tray 3 is out of paper.
Remedy: Check the installation of the Tray 3 No Paper Sensor (PL 10.4) and the operation of the actuator. The Sensor is installed correctly and the actuator works. Y↓N→Reinstall the Sensor. Execute Component Control [073-101], Tray 3 No Paper Sensor. Manually activate the Tray 3 No Paper Sensor (PL 11.8). The display changes. Y↓N→Go to BSD 7.7 - Tray 3 Paper Stacking (TTM) Troubleshoot the circuit of the Tray 3 Tray Empty Sensor. Refer to the OF 99-2, Transmissive Sensor RAP. Go to the 073-210 RAP to check the Tray 3 Feed LIft Motor. • Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw - update if required (GP 16)

← Xem tất cả mã lỗi Xerox WorkCentre 5330

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie