Description: Different Width Mix Punch RAP Different Width Mix Punch. Paper of different widths was detected while printing in punch mode.
Remedy: Copy: Cancel Punch mode (user intervention) Printer: Cancel Punch mode (auto cancellation) The same problem recurs. Y↓N→Correct the settings. Check the connection of each connector of the Finisher PWB. The connectors are properly connected. Y↓N→Connect the connectors properly. Check the connection of the cable between the machine and the Finisher. The cable is properly connected. Y↓N→Connect the cable properly. • Replace the Finisher PWB (PL 23.16), if the problem continues, replace the MCU PWB (PL 18.2). • Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw - update if required