Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-979 — Xerox WorkCentre 5330

Code: 024-979

Description: Low Staples RAP (Finisher LX) Staples Near Empty or Staple-feed failure.
Remedy: Execute Component Control [012-242 Low Staple Sensor]. Install and remove the Staple Cartridge. The display changes. Y↓N→Check the Staple Cartridge for failure or foreign substances. There are no foreign substances and nothing has failed. Y↓N→Repair the failure and remove the foreign substances. Check the wires between J8886 and P/J8981 for a loose connection, or an open or a short circuit. The wires are OK. Y↓N→Repair as required. Measure the voltage between the Finisher PWB J8886-5 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 22.7). Measure the voltage between the Finisher PWB J8886-7 (+) and GND (-). Install and remove the Staple Cartridge. The voltage changes. Y↓N→Replace the Finisher PWB (PL 23.16). Replace the Staple Assembly (PL 23.4) If the problem persists, replace the Finisher PWB (PL 23.16). Check the sw version of the controller sw - update if required. Replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5330

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie