Code: 072-900
Description: Tray 2 Feed Out Sensor Static Jam RAP When the power was turned ON, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Tray 2 Feed Out Sensor detected paper.
Remedy: Check the following: • The Feed Out Sensor (PL 15.1) for remaining paper, contamination, Actuator return failure, or improper installation • The Feed Out Sensor for failure: Component Control [072-100] (PL 15.1) • The connection between the Feed Out Sensor P/J110-1 and the MCU PWB P/J410-B3 for short circuit Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).