Description: Registration Sensor On Jam (Tray 4) RAP The Registration Sensor does not turn ON within the specified time after the Registration Clutch On after the Feed from Tray 4 has started.
Remedy: Check the following: • The Registration Sensor for failure: Component Control [077-104] (PL 15.1) • The connection between the Registration Sensor P/J121 and the MCU PWB P/J415 for open circuit, short circuit, and poor contact • The Main Drive Motor for revolution failure: Component Control [042-003] CW (PL 3.2) • The TM Takeaway Motor for failure: Component Control [077-033] (PL 11.15) (when the jam has occurred during Feed from Tray 3) • The Registration Transport Assy (PL 15.1 ) for installation failure Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).