Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-131 — Xerox WorkCentre 5330

Code: 077-131

Description: Duplex Sensor On Jam RAP The Duplex Sensor does not turn ON within the specified time after the Exit 2 Motor has started rotating in the Duplex intake direction.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path • Each Duplex Roll and Pinch Roll for contamination, wear, and revolution failure • Each Exit Roll and Pinch Roll for contamination, wear, and revolution failure • Each Duplex Roll Drive Gear for wear and damage • Each Exit Roll Drive Gear for wear and damage • Use of paper out of spec • The Duplex Sensor for contamination, improper installation, and Actuator operation failure
Check the following: • The Duplex Sensor for failure: Component Control [077-105] (PL 14.4) • The connection between the Duplex Sensor P/J109 and the MCU PWB P/J409 for open circuit, short circuit, and poor contact • The Duplex Motor for failure: Component Control [077-070] (PL 14.4) • The Exit 2 Motor for revolution failure: Component Control [077-015] (PL 17.5) • The Exit Gate Solenoid for failure: Component Control [077-004] (PL 17.4) Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).

← Xem tất cả mã lỗi Xerox WorkCentre 5330

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie