Description: HCF Docking interlock Open RAP HCF Docking Interlock Open. The HCF and the IOT were undocked.
Remedy: The display changes. Y↓N→Undock the HCF. Press the HCF Docking Interlock several times. The display changes. Y↓N→The voltage between PF/JF08-2 on the HCF PWB and GND drops to less that 1 VDC when the Docking Interlock is pressed. Y↓N→Check the wires between PF/JF08-1 on the HCF PWB and FS003 on the HCF Docking Interlock, and between FS004 on the HCF Docking Interlock and PF/ JF08-2 on the HCF PWB for an open wire or poor contact. If the wires are good, replace the HCF Docking Interlock Switch (PL 10.8). Replace the HCF PWB (PL 10.8). The problem could be misalignment between the HCF Docking Base and the IOT. Refer to PL 19.3. The problem may be intermittent. Check the circuit (BSD 1.11 - HCF Power Distribution) for loose or damaged wiring.