Description: DADF Inverter Sensor Off Jam (During Invert) RAP • After the DADF Registration Sensor turned OFF at Invert of the last document, the DADF Inverter Sensor did not turn OFF within the specified time. • During the Invert where there is a next document, after the Read Speed Control operation started (DADF Registration Motor On (CCW)), the DADF Inverter Sensor did not turn OFF within the specified time.
Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check the circuit between the DADF Registration Sensor and the DADF PWB • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)