Description: DADF Invert Sensor Off Jam RAP • After the DADF Registration Sensor turned OFF in the Scan operation, the DADF Invert Sensor did not turn OFF within the specified time. • During the 1 Sided mode scan operation where there is a next document, after the Next Document Scan Read Speed Control started (DADF Registration Motor On (CCW)), the DADF Inverter Sensor did not turn OFF within the specified time.
Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • The Gate Solenoid Component Control [005-090] for operation failure • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6) • Check the circuit between the DADF Registration Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)