Description: Finisher H-Transport Cover Open RAP (LX) The Finisher H-Transport Cover is open.
Remedy: Execute Component Control [012-303], H-Transport Open Sensor. Actuate the H-Transport Open Sensor (PL 23.4). The display changes. Y↓N→Check the wire between J8860 pin 2 and J8897 pin 2 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓N→Repair/reconnect as required. Measure the voltage between J8897, pins 3 and 1 on the Finisher PWB (BSD 12.14 - Office Finisher LX Horizontal Transportation. The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between J8897, pin 2 on the Finisher PWB and GND (BSD 12.14 - Office Finisher LX Horizontal Transportation). Actuate the H-Transport Open Sensor. The voltage changes. Y↓N→Replace the H-Transport Open Sensor (PL 23.4). Replace the Finisher PWB (PL 23.16). If the problem continues, replace the Finisher PWB (PL 23.16).